chucketn
Senior Citizen
I wanted to post to thank Chuck Fellows for his thread on the Arduino based Dividing Head/Rotary Table Controller project. I built his controller and applied it to my Vertex 4" Rotary Table and this afternoon used it to cut a pair of 46 tooth change gears for my buddy's Atlas lathe.
I have attached pics of the RT setup and the rough gears as they came off the mandrel. I still need to package the controller in a case to protect it in the shop, and of course the gears need fettling.
Thanks again to Chuck for sharing his creative abilities and opening doors for us lesser mortals!
Chuck
I have attached pics of the RT setup and the rough gears as they came off the mandrel. I still need to package the controller in a case to protect it in the shop, and of course the gears need fettling.
Thanks again to Chuck for sharing his creative abilities and opening doors for us lesser mortals!
Chuck