Foketry

Important modifications to get a better functioning of my 18 cylinder , I hope :rolleyes: : I would like to put the spark plugs on the...

Hi Pete your suggestions are useful and interesting, I'm designing important modifications for my 18 cylinder , in the next post I will...

yes, I added 1% Castrol 2T engine oil to the petrol

I redid all the pistons , rings and some cylinders I redid all the transmission joints, increasing the diameter, they were undersized

Some of the numerous problems detected during start-up attempts I made this recess on the piston to facilitate ignition of the...

It's a long story, I tried first with the 6 cylinders on the left, then the 6 central ones, then the last 6 on the right. During these...

The first pop of the engine, not yet complete

I had thought about putting 3 distributors, but I tried to design the transmission system with gears, too little space and too...

The designers had chosen 2 distributors because it was an aircraft engine, therefore double ignition and 2 spark plugs for each...

The designers had chosen 2 distributors because it was an aircraft engine, therefore double ignition and 2 spark plugs for each...

Distributor cap I designed and built the first prototypes with 3 levels in height, each level manages 6 cylinders. It runs at low rpm...

Isotta Fraschini 18 cylinder: problems detected on first starts : Distributor cap with irregular functioning Pistons with low...

The engine has made its first pops and is working, it still needs to be improved and refined, for now it only works at minimum rpm, I...

Hi Richard , the project is not stopped, I had other commitments so I worked for a short time on the project, but I'm on the home...