Help Support Home Model Engine Machinist Forum:
xpylonracer
Well-Known Member From Norfolk, UK
- Joined
- Messages
- 368
- Reaction score
- 90
Latest activity Postings About
-
-
I have been concerned for some time that when I installed the prop and tried to start the engine that the prop would unscrew itself from... -
I made an adaptor so I could fit the Sullivan cup to my cordless drill and made modified "spinners" for the engines for it to engage...
-
The rocker arms were hand finished with wet/dry paper, rubber abrasives in motor tool & 3M scuff pads. I wish I had the right...
-
Showing the side thinning milling. Required both flat mill & ball end mill to get the profile. I leave the mounting ears on as long as...
-
xpylonracer reacted to Olli-Matti's post in the thread Antares 2cc - model diesel engine build with
Like.
Thanks Andrew, Mitutoyo is always a mituotoyo 😉 I have Carl-Zeiss Jena comparator for 10-18mm and CCCP one fpr 6-10mm. I did end up... -
Hi all. Got the V Twin running:
-
Hi Guys, I understand the problem. The drawing calls up 40 thou fins, , for my version I ground a thin parting tool. It worked but very...
-
Making a 19 tooth gear for the crankshaft. These are the parts that makeup the valve timing for the engine. The 13 tooth and the thin...
-
xpylonracer reacted to xander janssen's post in the thread Threading a long rod and keeping it straight. with Like.
I use this technique by Joe Pie. YouTube by Joe Pie
-
Boring, drilling, and taping day. I used the boring head in the mill for the cylinder holes. Then drilled and taped 10 holes of 4-40...
-
This is THE bible for all things O-ring...
-
Now I'm waiting for the right moment to do a test flight with an easy plane that doesn't risk much. The plane has a 2.50m wingspan. Bruno
-
Some parts. I had started to make 2 of them. The second one is much less advanced because I wanted to make a different crankshaft for...
-
Hello, I mentioned it in my presentation as a new member, here it is in more details. The design is totally personal but uses solutions...
-
xpylonracer replied to the thread New 3-jaw chuck.. Which type of ER chuck did you use, MT tang type or backplate mounted ? xpylonracer
-
-
Loading…
-
Loading…