Looking for plans

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

isaiah lowe

Member
Joined
Sep 16, 2018
Messages
11
Reaction score
0
Location
australia
Anyone with plans for an I.C v8 or inline 4 or 6 can I grab these off you not a big fan of inches mm is preferred willing to pay
 
That site is a bit short on information regarding the V8 design, just price of plans with no detail that I could see regarding engine size or type.
Emgee
 
I have drawings available for a flathead V-8, an inline 6 and a 4 cylinder.
There are build threads on both the 6 an V-8.
gbritnell
 
Hello! I am a newbie to your group and I am wondering if any of you might have specs (bore size, stroke, etc.2) For Elf Model plane engines.

I have been given some castings but no drawings.

Thanks!
 
Hello! I am a newbie to your group and I am wondering if any of you might have specs (bore size, stroke, etc.2) For Elf Model plane engines.

I have been given some castings but no drawings.

Thanks!

Which Elf? There were several. Look here: http://modelenginenews.org/index.html Type Elf in the search box. Once you figure out what you have, check for any plans here: http://www.adriansmodelaeroengines.com/catalog/
Adrian might have info and you can also post your question on the blog.

WOB
 

Latest posts

Back
Top