Help Support Home Model Engine Machinist Forum:
D
danallen
Well-Known Member 65 From Southcoast MA
- Joined
- Messages
- 61
- Reaction score
- 24
Latest activity Postings About
-
-
Ddanallen replied to the thread 1950 South bend lathe restoration..Can someone provide a link or more detailed description of the belt you speak of. I have a 9a with a flat belt I would like to upgrade...
-
Ddanallen replied to the thread O ring head gasket..045 seems shallow. The Farm Boy hit n miss is designed for an o-ring head gasket and calls for a .060 deep groove.
-
Ddanallen replied to the thread Ring grooves.The best way to get a good finish in a groove is to have back clearance on the tool in addition to side clearance. You don't want any...
-
Ddanallen replied to the thread 1/3 Scale Ford 289 Hi-Po.I agree. That's going to be bigger than I expected. I am glad your sight is better.
-
DThe spark plugs in the full-size engine are angled down and away from the head to avoid interference with the stock exhaust manifold...
-
DStick them in from the other end, possibly the ratchet on your one needs to come off rather than the body shown below
-
-
Loading…
-
Loading…
