dgjessing
Well-Known Member
- Joined
- Feb 16, 2010
- Messages
- 295
- Reaction score
- 9
Kind of an impulse buy w/ 20% off coupon - a HF 3" rotary table ;D I don't really know anything about rotary tables (other than that I wanted one) but it seems like pretty nice little gizmo so far.
I want to be able to mount the 3" chuck(s) from my mini-lathe on it; what's the best way to do that? I was thinking about an aluminum hub with a raised cross milled in it to match the slots in the table and then a central hole for a bolt to hold it down. Unfortunately there is no precision central bore in it, only a 6mm threaded hole...
Any suggestions greatly appreciated!
I want to be able to mount the 3" chuck(s) from my mini-lathe on it; what's the best way to do that? I was thinking about an aluminum hub with a raised cross milled in it to match the slots in the table and then a central hole for a bolt to hold it down. Unfortunately there is no precision central bore in it, only a 6mm threaded hole...
Any suggestions greatly appreciated!