SignalFailure
Well-Known Member
- Joined
- Jan 1, 2008
- Messages
- 366
- Reaction score
- 3
I want to make an uber-simple double-acting piston-valve engine so I thought I'd draw out some plans for a change before cutting any metal ;D
Can someone who knows about such things please cast an eye over this initial drawing just to see if it looks about right?
I know that the eccentric/strap isn't shown the right size or position at present and that there's bits missing from both elevations (to avoid clutter) but I thought I'd get it checked out before going any further. Ignore the colour too, it's just there to help my slow brain. Oh and please excuse the fact that I probably haven't stuck to any drawing conventions and that the design is rather ugly!
Thanks in advance!
Can someone who knows about such things please cast an eye over this initial drawing just to see if it looks about right?
I know that the eccentric/strap isn't shown the right size or position at present and that there's bits missing from both elevations (to avoid clutter) but I thought I'd get it checked out before going any further. Ignore the colour too, it's just there to help my slow brain. Oh and please excuse the fact that I probably haven't stuck to any drawing conventions and that the design is rather ugly!
Thanks in advance!