Help Support Home Model Engine Machinist Forum:
TonyM
- Messages
- 409
- Reaction score
- 209
Latest activity Postings About
-
-
TonyM reacted to minh-thanh's post in the thread Diesel engine : Kromhout Gardner 4LW 1940 with
Like.
Hi All ! An update : Checked the gearbox, everything is fine, but I can't assemble it yet because I am missing a lubricating oil tube... -
Yes it runs Issues that had to be fixed. I had to move the gas tank up 1" as the fuel level would drop in the fuel line and there...
-
I made and polished the flywheel taper locks and mounted the flywheels on the engine. Everything fit and lined up correctly. It was...
-
TonyM replied to the thread Conversion of 4 x 6 bandsaw for vertical use only.I use the same saw for both horizontal and vertical using a better quality table fixed to the bottom guide. Your changes are much better...
-
This is my recently completed version of the Stuart James Coombes, I just used a Stuart Cylinder casting and fabricated or cut the rest...
-
TonyM replied to the thread Small air power supply for engines models..You can also use a normal CO2 regulator and use an adaptor.
-
TonyM replied to the thread Well, I dunno.....Only those that contribute monetarily are considered ''supporting members.'' It's a shame that people who contribute in the way of...
-
my little loco in gauge 1 (1/32) is not powered by a true diesel engine I confess, but a tiny 4 stroke petrol engine of 1.3 cm3 from my...
-
TonyM reacted to larryg's post in the thread What kind of lathe process would you recommend to make low pressure pneumatic cylinders? with Like.
What action do you want this cylinder to have? Extend only, extend with spring return, double acting, single or double rod? What...
-
Welcome to the premier of my latest model. Longboy's 'THREE BELOW" 3 cyl. gas engine. The THREE BELOW build was started last week...
-
Satin black on the 4x4 and the shoe bars. Will highlight the heads and cylinders well. Leaving all other parts natural polished...
-
TonyM replied to the thread Needle bearings in a model diesel ?.Just my two pennoth for what it's worth. I have seen needles used on a big end and have nothing to add in that regard. My thoughts are...
-
TonyM reacted to cheepo45's post in the thread Parcell and Weed Vertical air cooled engine with Like.
This is the vertical air cooled version. The castings came from Little Locos. The kit and plans are excellent! It has been a 3 year...
-
TonyM reacted to minh-thanh's post in the thread Diesel engine : Kromhout Gardner 4LW 1940 with Like.
Hi All ! An update Cylinder head assembly
-
TonyM reacted to minh-thanh's post in the thread Diesel engine : Kromhout Gardner 4LW 1940 with Like.
Hi All ! An update I have aligned and assembled the parts of engine This engine I will do the lubricating oil pump , but it will be...
-
-
Loading…
-
Loading…