Barnbikes
Well-Known Member
- Joined
- Jul 19, 2014
- Messages
- 194
- Reaction score
- 41
Have a pulley off of a old grain cleaner that I want to use as a flywheel for a Rider - Ericsson type pump engine.
It it is about 20" diameter and and about .750" wide.
I plan on grinding the teeth off. It is not very heavy. I would put a .250" rim on it but do not have access to a lathe big enough to turn the outside true.
What size cylinder diameter should I aim for?
It it is about 20" diameter and and about .750" wide.
I plan on grinding the teeth off. It is not very heavy. I would put a .250" rim on it but do not have access to a lathe big enough to turn the outside true.
What size cylinder diameter should I aim for?