- Joined
- Aug 25, 2007
- Messages
- 3,890
- Reaction score
- 715
Well, I figured it wouldn't hurt to make one or two pieces before I finished the plans. So, I got a good start on the crankcase sides for the Hoglet. I decided a 3/4 size would be best. These crankcase sides are 2 3/8" tall and 2 1/4" wide by 3/16" thick.
Some of you may have noticed that I have several projects in the air at once. When I get stalled on one, I like to have a second one to work on. I'm kind of stalled on the opposed 4 cylinder compressed air engine I started several months ago. In the meantime I finished Elmer's Open Column with reverse. Now I'm starting on another one.
Anyway, I probably won't do much more on the Hoglet until I finish the drawings.
Some of you may have noticed that I have several projects in the air at once. When I get stalled on one, I like to have a second one to work on. I'm kind of stalled on the opposed 4 cylinder compressed air engine I started several months ago. In the meantime I finished Elmer's Open Column with reverse. Now I'm starting on another one.
Anyway, I probably won't do much more on the Hoglet until I finish the drawings.