doubleboost
Well-Known Member
- Joined
- Feb 23, 2008
- Messages
- 122
- Reaction score
- 6
Hi
I have not posted foe some time but i have been watching
I have just bought a new lathe (new to me)
The lathe is 3 phase i am open to advice on 3 phase converters
After a clean up we noticed some damaged teeth on the rack .I was going to weld up the damaged areas and file them back to shape.
After talking to a old machinist he came up with a safer solution ,the damaged teeth were milled away and 2 5mm cap head bolts locktight ed in to place.
After some filing the results are very satisfactory.
Regards
John
I have not posted foe some time but i have been watching
I have just bought a new lathe (new to me)
The lathe is 3 phase i am open to advice on 3 phase converters
After a clean up we noticed some damaged teeth on the rack .I was going to weld up the damaged areas and file them back to shape.
After talking to a old machinist he came up with a safer solution ,the damaged teeth were milled away and 2 5mm cap head bolts locktight ed in to place.
After some filing the results are very satisfactory.
Regards
John