2D design

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thought this was meant to be about 2D, now we have a thread with two pages of 3D CAD screenshots :confused:
 
I then use the "scale" command" in ACAD, you have a couple options here, "Scale Factor" or "Reference", choose "Reference", it will ask you for the "Reference" dimension & you will enter 122.6897", it will then ask you for a dimension, you will enter 6" & next thing you know the WHOLE drawing will scale itself based around the 6" flywheel scale you entered. Pretty cool huh?

Not related to thread title.

.
 
Last edited:

Latest posts

Back
Top