Progress is slowly being made, cranks have been made, all main split bearings, keeps and oilers.
Crossheads and pins, expansion links, water pump and screw reverser (yes I whimped out on the square two start thread).
I have beefed up the valve rod from 1/8" to 3/16" , same with the weighshaft.
I had the paddle frames cut with a water jet from 1/8" mild steel, they look 100% better than the alloy originals.
Crossheads and pins, expansion links, water pump and screw reverser (yes I whimped out on the square two start thread).
I have beefed up the valve rod from 1/8" to 3/16" , same with the weighshaft.
I had the paddle frames cut with a water jet from 1/8" mild steel, they look 100% better than the alloy originals.