Help Support Home Model Engine Machinist Forum:
Eccentric
- Messages
- 319
- Reaction score
- 714
Latest activity Postings About
-
-
A 3/4" disk of 4-1/2" diameter Stressproof arrived from Speedy Metals in time to start work on the flywheel/ring gear. Its sawed ends... -
Eccentric reacted to raveney's post in the thread 1916 65 HP Case Traction Engine 1/16 Scale with
Like.
Hello again, Before starting the clutch and flywheel I had some unfinished business on the gear train. Made the brass bearing blocks and... -
Eccentric reacted to raveney's post in the thread 1916 65 HP Case Traction Engine 1/16 Scale with Like.
I was thinking of that also and went a different route. The original tractor uses this arrangement..... which I modeled as this..... it...
-
hello the radiator and video
-
Eccentric posted the thread Anyone from New Zealand? Familiar with New Zealand? Travelling there looking for suggestions. in New Member Introductions.Hi, I will be traveling to New Zealand soon and as our hobby has adherents from all over the world, I was wondering if anyone could make...
-
Eccentric reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
The engine is taking shape, I mounted the heads with the exhaust and intake manifolds, all with Viton ORings , resistant up to 180...
-
Eccentric replied to the thread Little Demon V8 - helpful hints (hopefully).Nicely done. I like to see how you are experimenting with ways to streamline the machining process when many copies of a part are...
-
Hi all members After finishing my Water cooled Farm Boy engine #663 in 2019 I decided to build a air cooled Farm Boy with a spice jar...
-
Eccentric replied to the thread Bench mill column.I used a razor blade on one side as a shim to square mine up.
-
Eccentric reacted to Foketry's post in the thread 18 Cylinders Isotta Fraschini (straight six-cylinder x3 ) with Like.
The heads assembled with rocker arms, camshaft , camshaft supports and 1:1 ratio gears rocker arms left and right
-
-
There was also an after-market Cobra oil pan available for some of these engines, but in my opinion it was a little gaudy, and so I...
-
The valve covers were up next. The stock engine's stamped steel covers were functional but lack panache. Since museum accuracy isn't my...
-
Eccentric reacted to Carbuilder's post in the thread Little Demon V8 - helpful hints (hopefully) with Like.
Got the rings installed, only breaking 1. I had a good look at the block before installing the pistons to make sure there was no more...
-
Welcome to the premier of my latest model. Longboy's 'THREE BELOW" 3 cyl. gas engine. The THREE BELOW build was started last week...
-
-
Loading…
-
Loading…
