Thanks for the incentive!

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

minerva

Well-Known Member
Joined
Aug 21, 2008
Messages
107
Reaction score
1
Hi all
I got to thinking the other evening what on earth could I contribute to a forum with so many talented members?
The answer came with an assessment of what I personally had gained from my lurking over the past two years (with the occasional post/comment)
Surprisingly I came to the conclusion that what I had gained most from your individual inputs was the confidence to "have a go".
Over the past two years I have avidly read anything that I thought would subscribe to an improvement in my workshop technique or indeed my workshop equipment, be it modifications to my small 7 x 12 lathe or making the basic tooling found in every-day workshops.
Now I haven't up to now had the foresight to fully document a "build" but attached is a photograph of my new shiny QCTP manufactured on the 7X12 with the addition of a vertical slide. It works a treat and the outlay was just under £10. (Toolpost and 15 holders)
So many thanks to you all for the encouragement . one member even has it written under his avatar "if you don't try it you will never know if you can do it. (thanks Bogs)
Now my new milling machine is to be delivered next Monday and the shenanigans will really begin
so "watch this space"
Regards
TerryT

QCTP.JPG
 
Fantastic TerryT.
I know what you mean. It's great isn't it?
And great job on the QCTP! Nice!
Be sure and post pics of the mill!
 
Terry, if you built that ship in your avatar, you should have no trouble with metal! I'll be watching this space. ;)

-Trout
 
Hi guys, Steve,Zee,Trout
Thanks all for the +ve comments.
As to the avatar trout, it's an ongoing 1:98 project build of HMS Victory, Admiral lord Nelson's flagship. I've been working on her on and off for the past 4 years ever since I found out a ggggrandfather of mine was a shipwright on said ship. As an ex pattern-maker the wood bit holds few mysteries after 65 years practice, which is more than can be said for metal-machining! however as I said before time will tell.
Regards
Terry
 
Terry

A little off-topic as regards machining, but as you are a Victory kind of fellow, check out this

[ame]http://www.youtube.com/watch?v=L2WdU3Zkeig[/ame]

Would have enjoyed being there!

Cheers, Joe
 
That's a slick looking QCTP Terry. Now you're the one giving incentives :bow:.
Thanks for posting the picture.

Cheers,
Phil
 
Hey Joe, awesome!!
and when you remember the gun crews could reload in something like 90 seconds, what a fearsome foe to be up against?

Phil.
thanks for the plaudits but a long way to go I think

and John
as mentioned before you must take some of the credit
 

Latest posts

Back
Top