Hello All! I am a regular at HMS and PM. Thank you for letting me join your group. I was lead here to ask a question about my steam marine motor i bought today.
The owner had passed away 13 years ago. His son asked me if i was wanted to buy this engine. I did but i do not know what brand or kit name it is.
The engine is about 22 inches high x 22 inches wide. One bore is 4 inch , the other is 2.5 inch. It has another 7 inch flywheel on the other side of the crank (taken off to stand it upright for pic). I would cruise the net for pics in the steam engine world but i have dial-up here in the woods and it takes forever . The engine has a "S" cast into a plate on each end of the cylinders. .....Thank you.....Dean
__________________
The owner had passed away 13 years ago. His son asked me if i was wanted to buy this engine. I did but i do not know what brand or kit name it is.
The engine is about 22 inches high x 22 inches wide. One bore is 4 inch , the other is 2.5 inch. It has another 7 inch flywheel on the other side of the crank (taken off to stand it upright for pic). I would cruise the net for pics in the steam engine world but i have dial-up here in the woods and it takes forever . The engine has a "S" cast into a plate on each end of the cylinders. .....Thank you.....Dean
__________________