harrzack
Member
- Joined
- May 14, 2013
- Messages
- 10
- Reaction score
- 2
Greets to all!
Just completed adding a set of Sinpo glass scales and DRO to my Little Machine Shop 3960 mill (a deluxe X2). This may be considered a bit of overkill for a small machine like this - but the JCXF series scales are small enough to tuck right in and be almost un-noticed. And the DRO box itself isn't THAT big...
I'm enclosing 2 overview pix here - and if interested you can see how I did the install on my site at
http://www.avrdev.net/dro-install-details/
=Alan R.
Just completed adding a set of Sinpo glass scales and DRO to my Little Machine Shop 3960 mill (a deluxe X2). This may be considered a bit of overkill for a small machine like this - but the JCXF series scales are small enough to tuck right in and be almost un-noticed. And the DRO box itself isn't THAT big...
I'm enclosing 2 overview pix here - and if interested you can see how I did the install on my site at
http://www.avrdev.net/dro-install-details/
=Alan R.