I'm in the midst of building this engine and need some help regarding the springs for the governor. Either I'm blind, or the design details for the springs are omitted from the drawings/instructions. The only narrative I seem to find is a statement to the effect that too strong or too weak springs will result in poor performance.
If anyone has the details i.e. wire dia. coil dia,and length, I'd sure appreciate hearing from you.
This would help me avoid doing a whole bunch of trial and error spring winding!
Thanks in advance.
If anyone has the details i.e. wire dia. coil dia,and length, I'd sure appreciate hearing from you.
This would help me avoid doing a whole bunch of trial and error spring winding!
Thanks in advance.