Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

H
Reaction score
217

Latest activity Postings About

    • H
      The other thing that may loosen a tapered gib key is to drive the pulley onto the shaft a little further. That will loosen the taper on...
    • H
      Hopper replied to the thread What is it?.
      There are screwdriver slots in the ends of those domed screws because they are valve adjuster screws out of a large diesel engine such...
    • H
      Hopper replied to the thread The Moriya Story -- short form !.
      Thanks Jim. Yes I too have a box of SS tube from smaller garden lights, about 5/8 and 3/4" OD, put away for a rainy day/smaller Stirling...
    • H
      Hopper replied to the thread What is it?.
      They look like shopmade machinist's screw jacks made using the domed tappet adjuster screws off the rocker arms of a large diesel...
    • H
      Hopper replied to the thread The Moriya Story -- short form !.
      Hi Jim. Just thought I would post a cheap and easy source of very thin walled stainless tube for Moriya II's displacer. For about $5...
  • Loading…
  • Loading…
Top