Mystery cross slide.....

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

charlesfitton

Well-Known Member
Joined
Jan 10, 2010
Messages
163
Reaction score
24
Don't know what this...at first I thought it was a milling bit for my UNIMAT, but not so.

No maker's markings or part numbers..

20150918_061445.jpg


20150918_061519.jpg
 
I have a milling attachment made by taig that is similar in every way. The only difference is that two of them are put together. My guess is that the alum. Joining piece is to offer y and. Z movement. And x in certain situations. Is actually a really good idea that I would like to have on mine.
On other Taig models there is a alum. block mounted on back to mount to the crossslide of most lathes.
Hope this helps

Mike
 
No mystery, it's a Taig. I own one. What that is specifically is the top of the table for the lathe, and the compound angle cross slide you can buy. If you want more info it's pretty easy to find by searching Taig Lathe.
 

Latest posts

Back
Top