Hello from Kapiti, New Zealand

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Oldsteamer

New Member
Joined
Jan 29, 2024
Messages
2
Reaction score
1
Location
Kapiti
I have just assembled an Enjomor hit and miss engine but cannot get it to fire! Tried everything. Timing double checked, good spark, but nothing. Any help appreciated.
 
Finally got it running today after a valve grind to remove high spots, and retimed it to fire about 5 degrees before TDC. Made a 2 prong starter to fit an electric drill. This did the trick….. now it needs some fine tuning.
 
I have just assembled an Enjomor hit and miss engine but cannot get it to fire! Tried everything. Timing double checked, good spark, but nothing. Any help appreciated.
Welcome to the group

Dave
 

Latest posts

Back
Top