Hello

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ben.atkinson1985

New Member
Joined
Mar 30, 2024
Messages
2
Reaction score
0
Location
Derby
Hello everyone, im just starting out in the world of steam engines, I have a couple of Stuart V10 engines to machine and build and also castings for the Stuart beam engine. I've build oscillating engines and vertical engines from plans and enjoying so far. I recently brought a little lot from the main bidding site and in with it there was a "Whitney city road London" reduction box, has a gear ratio of 1.10 I don't seem to be able to find a single piece of information on it any info greatly appreciated
Cheers
 

Attachments

  • IMG_20240509_034148807.jpg
    IMG_20240509_034148807.jpg
    1.6 MB
  • IMG_20240509_034158283.jpg
    IMG_20240509_034158283.jpg
    2.2 MB
Hello everyone, im just starting out in the world of steam engines, I have a couple of Stuart V10 engines to machine and build and also castings for the Stuart beam engine. I've build oscillating engines and vertical engines from plans and enjoying so far. I recently brought a little lot from the main bidding site and in with it there was a "Whitney city road London" reduction box, has a gear ratio of 1.10 I don't seem to be able to find a single piece of information on it any info greatly appreciated
Cheers
Welcome to the group

Dave
 
Back
Top