Hello from Arizona

[Vern2]

Found your section on Machining with Disabilities.

Video introduction

Got one good arm, had a stroke in 2004. Had to quit work.

I always wanted a metal shop I could work in. After Things got back to, I guess you could say normal, I started converting a single car garage to a metal shop. Really don't have any burning projects in mind, just a metal shop in Arizona :fan:

Vern

 

[Banjoe]

Hi Vern,

I've been preparing and reviewing drawings for over 40 years, and I don't think I've ever seen a reloading station and a plasma table on the same plan.

Way to go!!!

Joe

 

[Vern2]

Joe,

The layout drawing is not a plan any more, all tools are in place and ready for use. The only thing not there is the welding setup table, that's going to take over 450+ 5/8" plasma cut holes in 1/2" plate. Will use a mag drill and reamers to clean them up.

Here is the almost ready plasma table build.

Vern

 

[Herbiev]

Welcome to the forum Vern. That's a great workshop you got there. Thanks for sharing the pics.

 

[AussieJimG]

Welcome to the forum Vern, you sure aren't letting anything get in the way of what you want to do.

Jim