Help Support Home Model Engine Machinist Forum:
lohring
Well-Known Member
- Joined
- Last seen
- Messages
- 449
- Reaction score
- 163
Latest activity Postings About
-
-
lohring replied to the thread New Engine Design thought process.EngMod2T's results are sensitive to its inputs. If you have good numbers for things like fuel, air/fuel ratios, and the various...
-
lohring replied to the thread New Engine Design thought process.Here you are:
-
lohring replied to the thread Allison v1710..The smallest readily available turbochargers are the RHF series. At 1/4 scale each bank has around 54 cubic inches or .87 liters. Two...
-
-
lohring replied to the thread Allison v1710..Many unlimited hydroplane racers considered the Allison to be a stronger engine than the Merlin. With the addition of twin...
-
-
lohring replied to the thread Allison v1710..Look carefully at the cylinder picture I posted. From the Allison Manual: Cylinder Banks-Each cylinder bank comprises three basic...
-
-
lohring replied to the thread Allison v1710..I have manuals and undimensioned drawings. Attached is a cylinder drawing and two undimensioned drawings. A source is...
-
-
lohring replied to the thread 3D Printed Metal Engine Parts.This is a part I had printed in stainless steel. Lohring Miller
-
-
lohring replied to the thread Compression ignition.Model "diesel" engines have been around a long time. See https://en.wikipedia.org/wiki/ They run a fuel with equal parts kerosene...
-
-
Loading…
-
Loading…
