Help Support Home Model Engine Machinist Forum:
1
100model
- Messages
- 130
- Reaction score
- 150
Latest activity Postings About
-
-
1100model replied to the thread Casting bronze in a Buddhist temple.I have used two furnaces at the same time but it requires two human beings who know what they are doing to pull that off. It would be...
-
1Here is 100model's channel, otherwise known as luckygen1001, or ironman as I call him. 100model has taught several people that I know...
-
1Those are some nice plaques. The letters look surprisingly clean and crisp. I ran across another video of one of the "ingot-guys"...
-
1100model replied to the thread Beginner to melting iron..Look at pauls garage youtube channel, he use a naturally aspirated propane burner to melt cast iron. It easy to pour iron into ingots...
-
1One of my viewers made a comment on my channel that because of me he is hooked on pouring cast iron. It is great to see someone else...
-
1100model replied to the thread Question about lost PLA casting.I use any kind of glass color does not matter. It is added when the crucible is cold and full of scrap brass. It floats to the top and...
-
1100model replied to the thread Question about lost PLA casting.I have never used glass as a flux with cast iron but I always use glass when melting brass. If you use clean cast iron there is not much...
-
1100model replied to the thread Question about lost PLA casting.Forgive my ignorance, what does Mu mean?
-
1On one of my videos someone had built a oil burner and tried to melt cast iron and failed. He gave the link to a video which showed a...
-
1100model replied to the thread How to tune a foundry oil burner.My furnace will not start on 100% waste motor oil so that is why I use propane for 1-2 minutes to warm up the furnace and then switch to...
-
1100model replied to the thread How to tune a foundry oil burner.If I do a off grid demonstration where no power is available a propane tank can be connected instead of compressed air to pressurize...
-
1100model replied to the thread How to tune a foundry oil burner.A mechanical pump requires an inlet hose and outlet hose. A third hose is the most important because if for some reason the pump reaches...
-
1100model replied to the thread How to tune a foundry oil burner.I have used the same air compressor to pressurize my propane cylinder oil tank for 27 years and still works fine. Using a mechanical...
-
1100model replied to the thread What iron foundries add to cast iron..Did you notice in that list there was no nickelmag? Nickel is a very expensive metal so they use magnesium ferrosilicon or other alloys...
-
1100model replied to the thread What iron foundries add to cast iron..Iron pyrites is the common name for iron sulfide and when added to molten iron will raise the sulphur level. The reason why they add...
-
-
Loading…
-
Loading…
