Help Support Home Model Engine Machinist Forum:
-
-
Brad E Smith used to do 1/2 scale upright and fruit jar Maytags not sure if those are what you have -
Aerostar55 replied to the thread CNC Mach 3 Parallel port replacement.Thank
-
For this conversation, open loop refers to a CNC machine being run by software, such as Mach3, which causes one or more axis on the...
-
Some more parts.
-
Not quite there yet, still need to fit the piston and the steam intake fitting. Hope to have it running soon.
-
Aerostar55 reacted to littlelocos's post in the thread New Engine Coming from Littlelocos with
Like.
The flywheels and the rest of the castings are done in Silicon Bronze (C873 Everdur). They can be polished, painted, or given a patina. -
Aerostar55 reacted to littlelocos's post in the thread New Engine Coming from Littlelocos with Like.
Thanks Harry. My guess is that the guide and seat are not concentric. I'll need to make a small cutter to re-cut the seat using the...
-
Aerostar55 reacted to littlelocos's post in the thread New Engine Coming from Littlelocos with Like.
Sharing a photo of the air cooled prototype in its present form. Most likely will not be running at Cabin Fever. It looks like I have...
-
Looks great. I have been gifted a casting set of the water-cooled version from a friend and it's high on the list to make once I finish...
-
Aerostar55 reacted to littlelocos's post in the thread New Engine Coming from Littlelocos with Like.
Hello All, Just a short note to let you know that we intend to release an air cooled version of our 1/3-scale Parsell & Weed Hit and...
-
Aerostar55 reacted to littlelocos's post in the thread Littlelocos Model Engineering - Suspending Operations with Like.
Hello, After a two-year hibernation, Littlelocos Model Engineering is back with the Pip and Puck engine plans sets and lathe charts...
-
Aerostar55 reacted to littlelocos's post in the thread Littlelocos Model Engineering - Suspending Operations with Like.
Just a short notice that we will no longer be selling our plans sets and "Handy Little Lathe Charts" once our existing stock is...
-
Aerostar55 reacted to littlelocos's post in the thread Pete Menger Model Engine & Hobby Show, Monroeville, IN - October 14, 2023 with Like.
Thought I'd post this here as this show is coming up quickly. The Machinist Group of NE Indiana is holding their show in Monroeville...
-
Aerostar55 reacted to Eccentric's post in the thread Lynx 15 - Single cylinder, 4-stroke, Air Cooled, Over Head Cam ICE with Like.
You have a very sharp eye, Jasonb. I cut the chamfers at the top of the crankcase too deep and as a result the cylinder flange hangs...
-
Aerostar55 reacted to Mike Ginn's post in the thread CNC Mach 3 Parallel port replacement with Like.
In an earlier post I posed the question asking how to solve the problem of using a 20 year-old computer with a parallel port running...
-
-
Loading…
-
Loading…
-
Loading…