• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Graphite needed UK

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 27, 2012
Messages
70
Reaction score
8
Hi I'm sure I've seen the answer on here before but a search turned up nothing.

Where can I buy graphite from in the Uk?
 
http://www.nogginend.com/product/Graphite-Round-Bar

I need some myself so I checked this place out, but at an extra 150 UK pounds per order for me (extra delivery to Australia) it's a bit pricey.

Long story short, I did some hunting on ebay and found sellers of 'Stirring rods' for smelting gold, silver, etc. Quite a few sizes 1" and below. They say they're high density fine grade graphite and a 12" length of 1" diameter is only about $25 Australian (17ish pounds) including delivery from the USA. Even without delivery, 3" length by 1" diameter is 11 pounds at this Nogginend place.

I don't know if anyone has tried this stuff, but I'm willing to risk $25 to test it if no-one has.

Cheers,
Al.
 
nogginend looks good, will have a quick on ebay too. Thanks for the replies.
 

Latest posts

Back
Top