6 Cylinder Radial

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DMacdonald

New Member
Joined
Mar 19, 2014
Messages
1
Reaction score
0
Hi all,

I have started on my next project which is a 6 cylinder radial based on the Elmers 3 cylinder motor.

I am making it double size due to my lack of smaller tooling.

It will be 32mm bore.

ImageUploadedByModel Engines1395277605.735885.jpgImageUploadedByModel Engines1395277624.558018.jpg

This is the front cover.
75mm Dia
6001 bearings
The fits on the bearings are a little looser than expected.

ImageUploadedByModel Engines1395277691.620611.jpgImageUploadedByModel Engines1395277708.290959.jpg

Crank Case. 100mm Dia
The fit to the front cover is pretty good.

Thanks


Sent from my iPad using Model Engines
 

Latest posts

Back
Top