D duckman Member Joined Nov 12, 2009 Messages 15 Reaction score 0 Feb 4, 2010 #1 Why when I go looking for a 3/4" X 5/8" u-joint none can be found , but you can get just about any size over 3/4" :'(
Why when I go looking for a 3/4" X 5/8" u-joint none can be found , but you can get just about any size over 3/4" :'(
S Stan Well-Known Member Joined Jan 7, 2008 Messages 994 Reaction score 5 Feb 4, 2010 #2 If this is just for a plain round shaft, you could make a sleeve for one end of a 3/4 x 3/4. If it needs a key, slot the sleeve and make a key to fit.
If this is just for a plain round shaft, you could make a sleeve for one end of a 3/4 x 3/4. If it needs a key, slot the sleeve and make a key to fit.
gbritnell Project of the Month Winner!!! Project of the Month Winner Joined Jul 16, 2007 Messages 2,993 Reaction score 1,061 Feb 4, 2010 #3 How about this supplier. gbritnell https://sdp-si.com/eStore/PartDetail.asp?Opener=Group&PartID=57843&GroupID=202
How about this supplier. gbritnell https://sdp-si.com/eStore/PartDetail.asp?Opener=Group&PartID=57843&GroupID=202
D duckman Member Joined Nov 12, 2009 Messages 15 Reaction score 0 Feb 4, 2010 #4 I realized that I didn't specify needle bearing type .
tel Well-Known Member Joined Feb 8, 2008 Messages 3,293 Reaction score 44 Feb 5, 2010 #5 or here http://www.minibearings.com.au/store/partslist/universaljointssteel/couplingsuniversaljoint/all/1/3/
or here http://www.minibearings.com.au/store/partslist/universaljointssteel/couplingsuniversaljoint/all/1/3/