hacklordsniper
Well-Known Member
- Joined
- Oct 16, 2012
- Messages
- 182
- Reaction score
- 70
It arrived today, when i uncrated it i tought that there is no way i will ever get it inside trough steps and ordinary small door. It is really, really big compared to my old BF20 which was carried by me and my brother. Luckily i have a brilliant father, a jack of all trades who got it in the shop with nothing more than brain power and few primitive tools and without even a tiny scratch.
For now all is looking good and here are current faults i found, some are quite terrible:
1. 3xM5 screws hold the control panel, and one thread was stripped and screw was cleverly glued inside. However it fell out to halfway in shipping. I tapped to M6 and fixed it
2. Found 2 springs and plastic cap that fell off from somewhee, will need to ask manufacturer
3. Rubber way cover on Y axis was cut wrong, broken and then just tucked away like nothing happened
4. Someone forgot to apply anti corosive protection to underside of table and on X axis dovetails and it rusted very badly, any sugestions? Was able to remove alot of rust by rubbing with oil for an hour.
For now all is looking good and here are current faults i found, some are quite terrible:
1. 3xM5 screws hold the control panel, and one thread was stripped and screw was cleverly glued inside. However it fell out to halfway in shipping. I tapped to M6 and fixed it
2. Found 2 springs and plastic cap that fell off from somewhee, will need to ask manufacturer
3. Rubber way cover on Y axis was cut wrong, broken and then just tucked away like nothing happened
4. Someone forgot to apply anti corosive protection to underside of table and on X axis dovetails and it rusted very badly, any sugestions? Was able to remove alot of rust by rubbing with oil for an hour.