Hi all
Progress on the McOnie is slow but sure.
Photo 1 The fabricated crosshead in a jig for silver soldering.
Photo 2 Crosshead in place after a cleanup and polish, crank finished.
Photo 3 View of the crank.
Photo 4 Close up of the crosshead, guide bars and die block.
Regards Mike.
Progress on the McOnie is slow but sure.
Photo 1 The fabricated crosshead in a jig for silver soldering.
Photo 2 Crosshead in place after a cleanup and polish, crank finished.
Photo 3 View of the crank.
Photo 4 Close up of the crosshead, guide bars and die block.
Regards Mike.