looking for conrod bolts

[PeterLM]

Im looking for a conrod bolt that can be purchased ready made. I do not have the tools to make them in the quality I need, so I better by them.
So please drop me a line If you know where to get them.

The conrods are quite narrow at 8 mm ( or close to 1/4") and the bolts must not be wider. The heads can be tx or whatewer.
The conrods are still on the drawing table, so the length of the bolts are not settled yet.

It is for a small V4 engine. so I need 8 bolts for the engine, and a mate of mine is making one as well. So we need at least 16 bolts.

Peter

 

[stevehuckss396]

i am not sure what type of bolt you are referring to. i just use socket head cap screws and if you are nervous that they may come loose, just put a drop of loc-tite on them before you install them.