You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
Help Support Home Model Engine Machinist Forum:
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
-
-
P
Set the top slide parallel to the lathe axis and use that to put on fine cuts or space out things like cylinder cooling fins. It's what...
-
P
I do have the castings for the reversing mechanism, I have got to see if I have the drawings.
-
P
Very nice job, I am working my reversing gear so will be interesting to see how you are doing yours.
-
P
The valve chest, valve and valve spindle are next. I did not take a whole lot of pictures on this because it is all straightforward...
-
P
Back on the cylinder with some work on the portface. Use parallels to set the portface horizontal to the mill table as closely as...
-
P
I have had a similar experience with my Boxford "A" , basically a Southbend built in the UK.
I had to strip it completely so that I...
-
P
I looked at that lathe and was about to pull the trigger when a south bend appeared locally. It took some cleaning but I feel it’s a...
-
P
Look at youtube there are bad reviews on the Vevor lathe, it's not worth your hard earned money...
-
P
I do a fair amount of gun work for a local FFL shop and have a 12x24 Tiwan made gear head Harrison that I think highly of. Much of what...
-
Loading…
-
Loading…