Info

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wesley

Well-Known Member
Joined
Aug 2, 2009
Messages
137
Reaction score
16
Hi all ,my rudys steam tractor is coming along slow but am keeping at it ,was looking back on some old post about the tractor and se that douglanum had fitted a whistle to his,now l have a picture of his tractor an it comes out of the steam dome,and as l se it doug has not been on the forum since 2014 ,l dont think a pm would do me any good as to how he plumbed it in. so can any one help me with this one,can l tap in to one of the pipes or will l need to add another outlet when l build my boiler,will be very grateful for any help.
wes
 
Yet again a dam fine person has given me the info on what l was after,many many thanks jason
 
I guess you found out that you will be able to tie in your whistle into either the throttle valve or safety valve ports/piping under the steam dome? I'm attaching this view to maybe help you along with your build, would like to see pic's of how you're coming along.

John

CaseExploded.jpg
 
Back
Top