Hello from Bird City, Kansas

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Royce Chambers

New Member
Joined
Nov 30, 2023
Messages
1
Reaction score
4
Location
Kansas
Hello, I am a long time amateur machinist. I have built a couple of small engines (one of Rudy Kouhoupt's little horizontal engines and a similar vertical that I came up with). Now that I'm retired trying to finish some long time projects. Currently working on Philip Duclos Odds 'n Ends engine. I also ran steam tractors for many years and currently take care of the Corliss engine at the Tri-State Antique Engine and Thresher Show here in Bird City. I have a Sherline lathe and mill along with a 13" Jet lathe, Clausing 8530, Benchmaster Horizontal and a Farwell No 1 gear hobber circa 1905. I will try to add some pictures soon. Royce
 
I have been to the bird city engine show, very nice, welcome.
 

Latest posts

Back
Top