FarmBoy SN# 003-x2

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Engine maker

Well-Known Member
Joined
Jul 1, 2009
Messages
124
Reaction score
46
Location
Apollo, Pa
Its been kind of slow in the shop so I decided to get some large expensive blocks of aluminum and wittle something away. I made FarmBoy SN#003 and it ran so well that I knew someday I'd have to build another. Well how about FarmBoy SN# 003-x2. Twice as big 4 times as heavy and 8 times the swarf! I know how to have fun. Well all the parts are done and it's up and running. It's now running without the governor (I get them to run then I get them to miss). Here are a few pic, the video came out really bad, so I wont post that. I was holding the camera and trying to run the engine at the same time. It's now apart for final finishing and paint. Enjoy.

Jim G
 

Attachments

  • DSC01657.JPG
    DSC01657.JPG
    229.7 KB · Views: 280
  • DSC01658.JPG
    DSC01658.JPG
    295.5 KB · Views: 291
  • DSC01661.JPG
    DSC01661.JPG
    308.1 KB · Views: 284
Back
Top