- Joined
- Jul 29, 2008
- Messages
- 560
- Reaction score
- 62
Well I'm going to take the plunge into building a loco. I picked the Cracker because a few others here have built it so I can get some help if needed. I looked at shreds posts and I'm going to modify my engine so the wheels will be on the outside of the frame. I spent 2 hours in autocad redrawing the plans (If you want to call them that) alot of info or the plans are missing. I also took pictures of an old steam engine that is at the Lukins Steel museum in Coatesville,PA
Here are some pictures of the engine
The last picture is of the cab. Notice that the boiler takes up a lot of room. I would not want to have to be the engineer of that one.
I will post pictures when I start making chips
Dave
Here are some pictures of the engine
The last picture is of the cab. Notice that the boiler takes up a lot of room. I would not want to have to be the engineer of that one.
I will post pictures when I start making chips
Dave