Bill Harris 1-1/2" Scale STEAM ROLLER

[Jeff02]

I currently have the complete set of Live Steam Magazine for this project, but would also like to have a set of working drawings; if anyone knows where I could find them I would be very appreciative.
I have included a picture of a full sized Steam Roller that is very close to the one I am going to build.

Thanks for your Help!

 

[Jasonb]

Can't help with any drawings but I'll be interested in following the build.

There is probably a US traction engine site that may be a better place to ask or you could try on this UK one, there are a few Iroquois rollers over here, the model section of this forum is also handy for anyone making a traction engine.

Jason

 

[b.lindsey]

Hi Jeff,
I though maybe Village Press had alread reporduced these plans in one of their project booklets, but on checking, I only see Bill Harris' Donkey engine, and his Falk locomotive. You might contact them and see if they have any plans to reissue this particular project. Not much help I know.

Bill