Marty Feldman
Well-Known Member
- Joined
- Nov 24, 2009
- Messages
- 59
- Reaction score
- 5
Shars chuck, with matching Shars backplate. Backplate threaded 1-10 and ready to screw on similarly threaded lathe spindle, Atlas618 for example. Backplate will need a skim cut of about 20 thous for a nice snug fit into recess on back of chuck. Comes with backplate mounting bolts and chuck key and Shars Test Certificate for chuck model K72-100. Never used. $85 plus postage (US address).
-Marty, in Falmouth, Maine-
-Marty, in Falmouth, Maine-