3/4" Case

Discussion in 'A Work In Progress' started by bobden72, Jul 11, 2019.

Help Support HMEM by donating:

  1. Jul 11, 2019 #1

    bobden72

    bobden72

    bobden72

    Well-Known Member

    Joined:
    Jul 18, 2012
    Messages:
    96
    Likes Received:
    33
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Plymouth UK
    Hi I started building Rodeys Tractor and decided to make it more like a Case 65, you will notice the tapered stack. I built a 3" version about fifteen years ago so adding improvements from memory and pictures of mine. These few pictures are of the flywheel clutch which I have now finished and is working. I also intend fitting Wolf valve gear, a trunk guide, dummy heat exchanger, lubrication pump and dummy governor. QCx5p8%ST3iFDLcWHk03+Q.jpg 1qr3sXq0TEKbMx2%e0%SHg.jpg v6WegB%FQgOgCZ4Y0Ed1lg.jpg w8t9D6idRnaVSRSs7UMf+Q.jpg
     

    Attached Files:

    Last edited: Jul 11, 2019
  2. Jul 12, 2019 #2

    johnmcc69

    johnmcc69

    johnmcc69

    Well-Known Member

    Joined:
    Dec 5, 2011
    Messages:
    223
    Likes Received:
    33
    Looks good! Nice little clutch set-up.

    John
     

Share This Page