Naiveambition
Well-Known Member
- Joined
- May 15, 2012
- Messages
- 369
- Reaction score
- 95
Here is my first ever machining experience. Plans are to Elmer's 25 , changed only to vertical, due to material on hand. Took about 4 months total after learning to bore and find the beauty in a reamer. Engine has steel valve plate, aluminum cylinder with a brass piston. I know the combination is wrong for metals but this was just to see if I could do it or not.
I have no machine skills besides reading a couple old,old books and what I picked up on this site. So use this example, all of those scared to make a cut, go for it, if u mess up do it again. So a great thank to all of u who post there work here, since this is my first post, I have. Been learning from u for a long time and I'm sure their are many more like me
I have no machine skills besides reading a couple old,old books and what I picked up on this site. So use this example, all of those scared to make a cut, go for it, if u mess up do it again. So a great thank to all of u who post there work here, since this is my first post, I have. Been learning from u for a long time and I'm sure their are many more like me