after a long time on pondering on how best to heat my shop area. it was decided to leave the 3000 watt elec. heater in the wall and not replace it because of the cost. but i do plan to put more effective way to heat the area by installing 2x3 walls on my side of the garage (work shop). and with 2x3's only coming in 96" lengths the problem is to get the wall all the way to the ceiling which is 104". but i'm sure that another short piece can be added to the length by one of 2 methods. like just adding a lets say a 12" length to one side and extend that piece to make a longer 2x3. or add one of those metal spiked thingy's to lengthen the stud.and as for the doors to open up the area as much as can happen. it was decided to use closet doors which would be 36" each and make up a trolley to slide the doors on and have rubber seals at the bottom. or make up 2 doors myself using luan ply to make 48" doors.
but no matter how you look at it, it's all going to take time away from machining.
but no matter how you look at it, it's all going to take time away from machining.