Nanda Truggy NRT-3 PRO

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

agmachado

Well-Known Member
Joined
Nov 6, 2010
Messages
289
Reaction score
16
Hi Guys,

A few days ago I began assembly of the new automodel. This model is a 1:8 scale and is off-road.

Now some pictures of it...

DSC00340.jpg


Sure, my assistant... ehehehe!
DSC00342.jpg


DSC00346.jpg


DSC00347.jpg


DSC00350.jpg


DSC00351.jpg


DSC00352.jpg


DSC00353.jpg


DSC00355.jpg


DSC00357.jpg


DSC00358.jpg


DSC00360.jpg


DSC00361.jpg


All started with this...
DSC00362.jpg


And after this...
DSC00363.jpg


DSC00365.jpg


DSC00367.jpg


DSC00368.jpg


DSC00369.jpg


DSC00370.jpg


DSC00371.jpg


DSC00372.jpg


DSC00373.jpg


DSC00375.jpg


Soon to be continue...

Take care,

Alexandre
 
Hi Alexandre!

I missed this one!!!
It is looking good!!! ;D

Are you finished building it yet??
What size is the motor? I remember you told me but i have forgotten!!!

Andrew
 
Hi Andrew,

I not finished the assembly yet, but I will terminate soon... I need two servos of 25Kg... I will buy in next week for finish.

The engine is a 4.6 cm³ of 39,000 RPM... ehehehe!

Cheers,

Alexandre
 
Hi Alexandre,

I must say "very nice indeed". I see you have the Spectrum DX3 radio, I like all the Spectrum range of gear, I use it in all the models that I run right from the DX3 in my cars and boats to the DX6 in my choppers and planes. How have you found the Baja for performance and Handling?

I have never had a go at using one but have seen them go several times and have been very impressed, They look like lots of fun.

Baz.
 
Hi Guys,

Yesterday I assembled more some parts in my new model off-road car... I hope that you like it!

The engine...
2011-08-23005015.jpg


The fuel tank...
2011-08-23005050.jpg


And the servos...
2011-08-23004932.jpg


Soon will have more...

Cheers,

Alexandre
 
I used to race a 1/8 Kyosho Inferno and my assistant was smaller than yours ;). When the second assistant was born, there was no time anymore and I put the cars in a box. My first assistant has just completed her first year in medical university ;D. The years pass and we don't notice, it feels that it was yestarday ???
 
get out the box than and rebuilt the car :p
 
Hi !

Very cool, Noitoen... now you can use your Kyosho... I like this and I also have one... a Kyosho DRT... my first model car. See:
DSC00362.jpg


Cheers,

Alexandre
 
I just finished a rebuild of my son's and my cars. I've tuned mine now so that it flips over backwards if I get too frisky with the throttle.. ;D Way more fun than any human should be allowed to have...

9" long

2.5 pounds

4 wheel drive

anti lock brakes

0.6 Horsepower.....( 7.4 volts x 60 amps)

Gotta love it!

Dave
 
Yes!!!

I like that... but I need see pictures... Do you have?

Cheers,

Alexandre
 
I've posted these before Alexandre...but here they are again.

P4210103.jpg


P4210111.jpg


Dave
 
My car has a truggy style body and a wing.....and I run the ESC programed for higher ramp....I can set it to 6 out of 10....at that point the car is so overpowered that it's very difficult to control...

The brakes are the same way....I have to back them off or the car does a forward flip when I hit the brakes.

Dave
 
Hi Guys,

Yesterday I assemble the absorbers (in english I don't know the name of it) and installed it in the chassis. See...

2011-08-28001832.jpg


2011-08-28005242.jpg


2011-08-28005440.jpg


2011-08-28005505.jpg


Cheers,

Alexandre
 
Looking good Alexandre!!! ;D

They are called "Shock Absorbers"
Are they plastic or anodized aluminium shocks?

I like that they have the soft rubber boot to protect the shaft from dirt!

Very cool car!

Andrew
 
Hi Andrew,

Thanks for name...

They are anodized aluminium and are very resistants.

Cheers,

Alexandre
 
Hi Guys,

After sometime I completed the assembly of my truggy. In reality, missing mount only the body... I don't have the tool to pierce the body, in the next week I will buy this tool.

The engine is very good and very strong, but I'm softening yet and isn't convenient accelerate now, becouse the mixture is very rich to facilitate the lubrification.

2012-01-28193322.jpg


2012-01-28193358.jpg


Cheers,

Alexandre
 
Hi Guys,

I believe that you will like to see this...

[ame=http://www.youtube.com/watch?v=KUWf4cGcslA]Truggy in High Speed[/ame]

Cheers,

Alexandre
 

Latest posts

Back
Top