My Hit-and-Miss Cleaned Up

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rudydubya

Well-Known Member
Joined
Nov 26, 2008
Messages
337
Reaction score
7
She looks better now that she's cleaned up and uncluttered. I made the spark plug from a Fox glow plug body and a sample of Corian countertop I got from a local home improvement store. It worked OK, but I broke off the bottom electrode trying to adjust the gap (note to myself -- those plugs weren't meant to be adjusted). Still worked even after that, the spark path was between the middle electrode and the side of the body. But I thought a hotter plug might be better because of the way the plug was situated in the head, and bought a Rimfire from Jerry Howell. I think it runs a little better with the Rimfire. The one I made is shown in these pictures.

HitandMissCleaned1.jpg


I made the fuel tank body from a piece of 1" diameter brass toilet tank overflow pipe and some brass sheet for the ends. The cap and fill tube are brass lamp parts.

HitandMissCleaned2.jpg

I made all the springs from music wire using a tool described in Model Engine Builder magazine. The hardest for me to get right were the intake valve spring and the flywheel governor springs.

HitandMissCleaned3.jpg


The plans give the option of placing the spark plug in the side of the head or in the top of the head. I chose the top because I thought it might be easier to make that way, but if I had it to do over again I'd put it in the side. It's harder to insert and remove in the top, and I was getting some occasional sparking to the rocker arm until I insulated the plug wire better.

HitandMissCleaned4.jpg


Rudy
 
Veeerrrrrrryyyyyyyyyy Nice !! :bow:

What'd you use to get the blueing effect ?
 
Wow, Super! I like it a lot! :bow:

A fine example that's nicely detailed from the oiler at the top all the way down to the wooden base.

Very interesting and creative use of materials for the fuel tank construction.

PM-Important that you Send it to me for further assessment!

I will send it back a.s.a.p. ;D

-MB

 
ChooChooMike said:
Veeerrrrrrryyyyyyyyyy Nice !! :bow:

What'd you use to get the blueing effect ?

Mike, thanks. I'm afraid the blueing effect is due to poor lighting and poor photography technique.

Metal Butcher said:
...PM-Important that you Send it to me for further assessment!

I will send it back a.s.a.p. ;D

-MB

MB, thanks. It will be in the mail as soon as I receive your mill engine. ;D Great work.

Rudy
 
rudydubya said:
Mike, thanks. I'm afraid the blueing effect is due to poor lighting and poor photography technique.

I was thinking that the color balance of the camera/lights might be affecting it. But that would certainly make a nice touch to the engine anyway !!

Good job again :)

Mike
 
Superb :bow: :bow:

Best Regards
Bob
 

Latest posts

Back
Top