J John Rudd Well-Known Member Joined Oct 14, 2009 Messages 311 Reaction score 2 Nov 19, 2011 #1 Thought I'd post up a pic of my mini rotary table made for small stuff..
J joe d Well-Known Member Joined Nov 25, 2007 Messages 718 Reaction score 9 Nov 19, 2011 #2 Hi John That's a nice looking piece of kit. Dimensions? (Inquiring minds want to know.... : Cheers, Joe
Hi John That's a nice looking piece of kit. Dimensions? (Inquiring minds want to know.... : Cheers, Joe
J John Rudd Well-Known Member Joined Oct 14, 2009 Messages 311 Reaction score 2 Nov 20, 2011 #3 The base holding part ( held in a milling vice ) is 1 in sq EN1, the table base is 0.5in about 3in square and the top table about 0.5 in thick and 2.75 in diameter....
The base holding part ( held in a milling vice ) is 1 in sq EN1, the table base is 0.5in about 3in square and the top table about 0.5 in thick and 2.75 in diameter....
J joe d Well-Known Member Joined Nov 25, 2007 Messages 718 Reaction score 9 Nov 20, 2011 #4 Thanks, John. That would be a very handy size for my Taig mill... Another one for the Tuit list. Joe
