mini lathe

Discussion in 'General Engine Discussion' started by litoweapon619, Nov 12, 2011.

  1. Nov 12, 2011 #1

    litoweapon619

    litoweapon619

    litoweapon619

    Active Member

    Joined:
    Aug 19, 2011
    Messages:
    34
    Likes Received:
    0
    is there a 4 jaw chuck for a 7 x 10 mini lathe?

    thanks for the help

    or FACE PLATE
     
  2. Nov 12, 2011 #2

    Troutsqueezer

    Troutsqueezer

    Troutsqueezer

    Project of the Month Winner!!! Project of the Month Winner

    Joined:
    Aug 8, 2009
    Messages:
    930
    Likes Received:
    11
  3. Nov 12, 2011 #3

    jct842

    jct842

    jct842

    Well-Known Member

    Joined:
    Nov 21, 2010
    Messages:
    97
    Likes Received:
    0
    I put a 5" from little machine shop. It is many times heavier than the 3" 4 jaw and 3 jaw chucks I have. my cumins came with the face plate. can also get a 6 inch on it but it would not take extending out the jaws much to hit the ways. john
     
  4. Nov 12, 2011 #4

    steamer

    steamer

    steamer

    Well-Known Member

    Joined:
    Nov 30, 2007
    Messages:
    5,406
    Likes Received:
    26
    Faceplate and Fourjaw! Now your talking!


    Dave
     
  5. Nov 12, 2011 #5

    Tin Falcon

    Tin Falcon

    Tin Falcon

    Well-Known Member

    Joined:
    Jul 9, 2007
    Messages:
    7,212
    Likes Received:
    759
    Yep from several vendors. LMS is good to deal with especially if you are on the west coast or meet up with them at a show.
    Tin
     
  6. Nov 12, 2011 #6

    jonesie

    jonesie

    jonesie

    Well-Known Member

    Joined:
    Aug 23, 2009
    Messages:
    274
    Likes Received:
    1
    got mine from LMS and works real good. going to make a mount so i can use on my clausing then to turntable. jonesie
     
  7. Nov 12, 2011 #7

    litoweapon619

    litoweapon619

    litoweapon619

    Active Member

    Joined:
    Aug 19, 2011
    Messages:
    34
    Likes Received:
    0
    thanks for the help :D


    how much do they run for?
     
  8. Nov 15, 2011 #8

    kwoodhands

    kwoodhands

    kwoodhands

    Well-Known Member

    Joined:
    Jan 5, 2010
    Messages:
    49
    Likes Received:
    2
    The 4 jaw with a backing plate if I recall is around $90.00 plus shipping.Go to their website and you can get the exact price including shipping.
    Google,Little Machine Shop
    mike
     
  9. Nov 17, 2011 #9

    RMO

    RMO

    RMO

    Working on it...

    Joined:
    Aug 28, 2010
    Messages:
    58
    Likes Received:
    1
    I have a nearly new 4 jaw, only used for one project. Traded the lathe but still have the four jaw. I may have a face plate as well. Let me know if interested.

    Mike
     
  10. Nov 17, 2011 #10

    litoweapon619

    litoweapon619

    litoweapon619

    Active Member

    Joined:
    Aug 19, 2011
    Messages:
    34
    Likes Received:
    0
    yeah man im interested
     
  11. Nov 17, 2011 #11

    RMO

    RMO

    RMO

    Working on it...

    Joined:
    Aug 28, 2010
    Messages:
    58
    Likes Received:
    1
    I couldn't get pics up on the pm so I put them here.

    chuck body.jpg

    faceplate front.jpg

    faceplate back.jpg

    chuck back.jpg
     
  12. Nov 17, 2011 #12

    litoweapon619

    litoweapon619

    litoweapon619

    Active Member

    Joined:
    Aug 19, 2011
    Messages:
    34
    Likes Received:
    0
    look really good

    thanks man
     

Share This Page