LittleJohnny
Member
- Joined
- Apr 13, 2012
- Messages
- 18
- Reaction score
- 4
Well me and my co worker started to design and machine a 4 cylinder dohc on the cnc. Some of its based off a k-20 some is improvements and some is from scratch and seeing what works. I have the block set up and it started to mill the contour today but I could only put a couple of hours on it. I will try to take some pics to share later. So far started with a 2.375" x 4.250" x 2" aluminum block and a 1/2 two flute hss end mill. working on a good cooling system but still got some time. well later days I will keep every one posted.
Johnny 4
Johnny 4