Hi all,
Id like to know if anyone can help me with a small part i need to get milled out in brass (or similar).
Its a scale model pitot tube (pointy thing on the front of a plane) but is very fine, around 0.8mm diamiter at its thinnest point and around an inch long.
I have traditional plans and CAD designs, and can get a resin master done if needed. I just need somone with the know-how to mill out about 20 of these for a sane price ;D
Replies or emails welcomed. Thanks in advance for any help.
Cheers
Eddie V
Id like to know if anyone can help me with a small part i need to get milled out in brass (or similar).
Its a scale model pitot tube (pointy thing on the front of a plane) but is very fine, around 0.8mm diamiter at its thinnest point and around an inch long.
I have traditional plans and CAD designs, and can get a resin master done if needed. I just need somone with the know-how to mill out about 20 of these for a sane price ;D
Replies or emails welcomed. Thanks in advance for any help.
Cheers
Eddie V