jwcnc1911
-jwcnc191
- Joined
- Mar 19, 2013
- Messages
- 603
- Reaction score
- 86
This will be my first flame licker engine. It was a nice yet simply looking design I found on a French forum I frequent. Designed by Christophe Fournier. A great gentlemen, he will be happy to talk to you.
I only had an hour and wanted to make a part I could finish for the satisfaction of having "a good start" on this engine. You can also see this engine and a link to his drawings on YouTube. Search for "AFCF1 flame licker".
I had to translate the drawings, convert to imperial (not absolutely necessary but it helps with my dials).
This was a simple part, you can see the process. It only has one tight tolerance and the 5mm reamer is well in spec.
Don't expect frequent updates... my personal time is limited.
I only had an hour and wanted to make a part I could finish for the satisfaction of having "a good start" on this engine. You can also see this engine and a link to his drawings on YouTube. Search for "AFCF1 flame licker".
I had to translate the drawings, convert to imperial (not absolutely necessary but it helps with my dials).
This was a simple part, you can see the process. It only has one tight tolerance and the 5mm reamer is well in spec.
Don't expect frequent updates... my personal time is limited.