• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Elmer Wall mighty mite castings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mcjustis

Well-Known Member
Joined
Sep 4, 2011
Messages
68
Reaction score
38
I picked these up awhile ago and just don't see them going anywhere in my shop, other than under the bench. I only have the block and the pan. Nothing else. The block is cast iron and the pan is aluminum. I don't have prints, or any other castings for this engine. Just these two pieces. I'll let them go for $100 plus shipping.
Thanks,
Martin
 

Attachments

  • wall1.jpg
    wall1.jpg
    69.4 KB · Views: 10
  • wall2.jpg
    wall2.jpg
    28.7 KB · Views: 0
  • wall4.jpg
    wall4.jpg
    28.9 KB · Views: 0
  • wall6.jpg
    wall6.jpg
    93 KB · Views: 0
  • wall7.jpg
    wall7.jpg
    67.7 KB · Views: 0
Back
Top